MPX is the reflection of 35 years of technological advancement. Combing two worlds, Infrared and convectional heating system, the MPX with its compact size can still be used for commercial grade applications as well as applications requiring limited space.
Heat from air and radiant energy resulting in the highest efficiency heater, the MPX. MPX equips a larger radiation disk and improves combustion efficiency by 13% and is able to provide more heat further away compared to the Daystar.
DUEL HEATING SYSTEM - the MPX with its advanced technology, uses both Infrared and convectional heating to offer the highest efficiency heating and because of its compact size and portability can still be used commercially as well as areas requiring limited space.
HIGH/LOW OUTPUT CONTROL - The MPX has an output control that enables its user to choose between a high or low output thus making it very economical.
LONGER OPERATIONAL TIME - The MPX is able to operate continuously for over 15 hours with low speed combustion which enbales it to operate all night without refueling.
QUIET OPERATION - MPX's efficient burner allows it to operate quietly with a noise level of about 59dB even at high setting, still lower than typical forced-air heaters' noise level at about 75dB or more.
High: 62,500 BTU/hr 18kW
Low: 55,500 BTU/hr 16kW
Kerosene or Fuel-Oil no heavier than No.2 (Diesel)
High: 0.48 gal/hr
Low: 0.42 gal/hr
|Continuous operating time||
High: 13.7 hours
Low: 15.7 hours
When igniting: 110W
|Operating Noise Level||
High: 59.4 dB
Low: 57.8 dB
|Dimension (H x W x D)||
28.4 x 20.5 x 26.6 (inch)
|Adjustable Disk Angle||
Vertical angle of radiation disk can be adjusted up to 45 degrees
Tip-over, Flame monitor, Electrical system protection, Overheat
Below are practical applications of how MPX can serve you and your needs.
- Body shop, Garage
- Factory, Plant, Workshop
- Outdoor Projects
- Drying of paint and adhesives
- Asphalt and concrete preparation
Below are some relevant downloads regarding MPX.